The Unofficial P-64 Resource Message Board
« CHANGING SPRINGS IN PA-63 AND MOST FEG SMALL FRAME »

Welcome Guest. Please Login or Register.
Feb 10, 2010, 3:05am




The Unofficial P-64 Resource Message Board :: Off-Topic - Other Firearms :: Other 9x18's :: CHANGING SPRINGS IN PA-63 AND MOST FEG SMALL FRAME
   [Search This Thread][Send Topic To Friend] [Print]
 AuthorTopic: CHANGING SPRINGS IN PA-63 AND MOST FEG SMALL FRAME (Read 618 times)
NORMSUTTON
Global Moderator
*
Global Mod & Resident Smith
member is offline

[avatar]

N.R.A. LIFE MEMBER 1976

[aim]

Joined: Feb 2006
Gender: Male
Posts: 2,837
Location: LAKELAND FL.
 CHANGING SPRINGS IN PA-63 AND MOST FEG SMALL FRAME
« Thread Started on Mar 1, 2009, 4:29pm »

CHANGING SPRINGS IN PA-63 AND MOST FEG SMALL FRAMED PISTOLS
you can get springs at http://www.gunsprings.com/SemiAuto/FegNF.html#PA63


FIRRING PIN SPRING AND RECOIL SPRING

TOOLS

[image]
a plastic bag that you can see though and get both hands in
hemostats
tweezers
dental pick

MAKE SURE GUN IS UNLOADED


RECOIL SPRING
take the slide off
if you don't know how download this or print it
http://www.angelfire.com/oh2/manowar/images/PA63.pdf

it will give you the basics

pull spring off
put new spring on small end first

[image]

while you got your slide off you can change your firing pin spring



FIRING PIN SPRING

the first thing is to take the extractor out

take dental pick put it in between the extractor and the extractor pressure pin
[image]

pull back on the extractor pressure pin and take out extractor slowing let go of extractor pressure pin
and take out
[image]

[image]


push firing forward as far as it will go take hemostats and clip the on to the firing pin

[image]

put muzzle end of slide strait down this will relieve the safety pin

you may have to pull down on the hemostats at the same time wiggle and turn safety until comes out

release hemostats take firing pin out

[image]

[image]

there is a small spring with a plunger on top of the firing pin you may want to just clean it and put it back

pull firing pin spring off and replace

put back together in reverse order

NORM
Link to Post - Back to Top  IP: Logged

NORMSUTTON@AOL.COM
[image] [image] [image]
NORMSUTTON
Global Moderator
*
Global Mod & Resident Smith
member is offline

[avatar]

N.R.A. LIFE MEMBER 1976

[aim]

Joined: Feb 2006
Gender: Male
Posts: 2,837
Location: LAKELAND FL.
 Re: CHANGING SPRINGS IN PA-63 AND MOST FEG SMALL F
« Reply #1 on Mar 1, 2009, 4:31pm »

CHANGING HAMMER SPRINGS

TOOLS

[image]

small hammer
punch
screw driver

take grips off

[image]

be careful not to lose the sear push pins there are 2 of them and they will fall out one on each side
[image]

[image]
drive the pin out of frame and the hammer spring plug

[image]

pull out hammer spring plug and spring

[image]

put together in reverse order

NORM
Link to Post - Back to Top  IP: Logged

NORMSUTTON@AOL.COM
[image] [image] [image]
   [Search This Thread][Send Topic To Friend] [Print]

Click Here To Make This Board Ad-Free


This Board Hosted For FREE By ProBoards
Get Your Own Free Message Boards & Free Forums!